FAQs

These answers are the English FAQ entries published for LuckJingle printers. Editorial notes are omitted. For a specific model, open that model page.

1,Printed paper with white stripes?

Please check whether the printer is covered properly. If it is covered well, please check whether the print head has stains. If there is dirt, you can use a cotton swab and alcohol to wipe the print head to ensure that the print head is clean and dry.

2,Does the printer need ink cartridges to print?

No need, the use of thermal printing technology, by heating the thermal paper to produce printing.

3,Is the printer light abnormal?

If the printer has abnormal light phenomenon, please check whether the printer hand is not covered, low power, lack of paper or overheating phenomenon, if not, please contact the after-sales solution.

4,How to connect the printer with Bluetooth?

a. When connecting the printer, turn on the Bluetooth of your mobile phone (if you can't search, turn on all permissions). Double - click the button to print the two - dimensional code and then scan the two - dimensional code to connect. b. Connect the printer in the APP instead of in the system settings. If it has already been connected in the Settings, disconnect and delete it, and then reconnect via the app. c. The printer is temporarily disconnected and needs to be disconnected and reconnected.

5,What is a Luck Jingle printer?

Luck Jingle printer is a pocket thermal printer designed to print anything & anywhere you want! Just connect it with your phone to start printing. It is easy to use, super cute and easy fit your pocket or bag so it's super portable! Print notes, memo, photos, to-do list and more.

6,Can Luck Jingle print color?

Our printer uses thermal printing technology, which can only produce black-and-white output on thermal paper. This system heats special thermal-coated paper to create images without ink.

7,Why is the print color light?

a. Please check whether the power of the printer is sufficient, ensure that the power is at least 50%, if not, please sufficient power. b. The printing content pixel is too low to ensure that the printed content is relatively clear and without impurities, please adjust the printing concentration to thick when printing Settings. c. Carbon deposit in the print head, the residue of paper scraps in the printing process may lead to dirty print head, please use cotton swabs with alcohol to wipe the print head to ensure that the print head is clean and dry.

8,Can I print color photos?

Not currently supported, the current thermal technology only supports printing black, white and gray photos.

9,How to check the power of the printer?

Click My, select My device, in my device you can check the printer's power.

10,Printer paper size selection?

This model is suitable for thermosensitive paper with a width of 57 mm and a diameter of 30mm.

11,The printer can't charge?

If the printer can not be charged, please check whether there is a problem with the charger or charging cable, check whether the plug is powered on, if not, please contact the after-sales service.

12,No content on printed paper?

This may be the printer paper in the opposite direction, please try the printer paper in the opposite direction, reload the paper and print again.

13,Can't print?

a. Check whether the Bluetooth of the mobile phone is turned on, and exclude others from connecting to the printer b. Check whether there are any consumables. If the consumables are used up, replace them in time c. Check whether the print head is overheated. If the print head is overheated, please wait until the print head cools and try printing again. d. Changan key, restart the printer e. If the problem persists, contact the customer service

14,Can't find your device in the APP?

A. The printer is not turned on or powered off, so that the mobile phone cannot search the device to Bluetooth, please check whether the printer is powered off or powered off b. The printer is too far from the mobile phone: the effective transmission distance of the Bluetooth device is very short, and over a certain distance there will be breakpoints or even cannot establish a connection, so the distance between the Bluetooth device and the mobile phone should not be too far c. The phone does not turn on Bluetooth and GPS location: the feature of Android's latest system Android10 requires the Bluetooth and GPS(location information) switch to be turned on at the same time

15,Indicator status description:

a. Blinking red: Low battery b. Steady red: Charging is underway c. Steady green: Charging is complete d. The red light is steady on: the paper is missing/the temperature is too high/the cover is open e. Orange indicator Steady on: Enter the printer debugging mode, and press and hold the power button until the printer shuts down to exit the debugging mode